Smooth, Safe, Restored Driveway Surfaces
Eliminate trip hazards, level uneven slabs, and restore rough or stained driveways to a smooth, safe finish. Professional concrete grinding across Brisbane using commercial-grade equipment and proper dust extraction.
Get a Free QuoteSurface Restoration
Trip hazards, lippage between slabs, rough surface finishes, paint and adhesive residue, or an uneven driveway that sends every visitor stumbling - concrete grinding fixes problems that resurfacing and patching can't.
Our team delivers professional Brisbane concrete grinding homeowners, builders, and property managers rely on for driveway restoration, hazard removal, and surface preparation. We bring industrial-grade grinders, proper dust extraction, and the experience to know exactly how much material to remove and where.
When You Need It
Concrete grinding uses diamond-tipped rotary discs to mechanically shave down the top layer of a concrete surface. Depending on disc grade and pressure, grinding can remove a paper-thin skim of contaminants or several millimetres of hardened concrete.
Trip hazards where slabs have lifted, settled, or shifted out of level with each other
Surface lippage between adjoining concrete sections after ground movement
Rough, pitted, or unevenly floated finishes left by poor original workmanship
Paint, adhesive, glue, and coating residue from old line marking or surface treatments
Tyre marks, oil stains, and contamination ground deep into the concrete
High spots and ridges that pool water or interfere with drainage
Preparation for sealing, coating, or resurfacing so new finishes bond properly
Hazard Removal
Lifted slabs are the most common reason Brisbane homeowners call us. Tree roots, expansive clay soil movement, and settling sub-base all cause one slab to rise above the next, creating a sharp vertical lip that catches feet, prams, suitcases, and mobility aids.
These hazards are a genuine liability risk for commercial properties, body corporates, and rental properties. Our service tapers the high slab down to match the lower one over a gentle slope, eliminating the hazard without demolishing or replacing anything.
Grinding levels float marks, trowel ridges, surface waves, and aggressive broom finishes, producing a uniform surface ready for sealing, staining, or concrete coating.
Clean Surface Prep
Painted lines, old sealer build-up, glue residue, epoxy overflow, and stubborn oil staining all respond to grinding when chemical cleaning has failed. We strip the surface back to clean, sound concrete, ready for whatever finish you want next.
Converting an old commercial site to residential use
Preparing a driveway for fresh sealing or decorative coating
Removing line marking from former carpark or shared driveway areas
Cleaning up after demolition or removal of structures previously attached to the slab
We service the full Brisbane northside, including Chermside, Aspley, Bracken Ridge, Albany Creek, Stafford, Everton Park, Kedron, Wavell Heights, Nundah, Geebung, and surrounding suburbs. Northside jobs often include older driveways where ground movement has caused slab lippage and tree root pressure has lifted sections out of alignment.
West Brisbane has its own challenges, with expansive clay soils through The Gap, Kenmore, Indooroopilly, Chapel Hill, Bardon, Paddington, and Toowong causing significant slab movement over time. We also service Ashgrove, Mount Coot-tha, Auchenflower, Milton, Sherwood, Graceville, and Corinda on the same western Brisbane run.
Transparent Pricing
The single most common question we get is about concrete grinding Brisbane prices. The honest answer is that grinding cost depends on a few key factors:
Total surface area to be ground
Depth of grinding required, from a thin skim to significant material removal
Number and severity of trip hazards or specific spot fixes
Access conditions including stairs, narrow gates, or tight working spaces
Disposal requirements for slurry and dust
Surface preparation needs for any follow-on coating or sealing
Small jobs like single trip hazard removal typically start in the low hundreds of dollars. Full driveway grinding for hazard remediation usually falls in the mid-hundreds to low-thousands range depending on size and condition. Larger commercial jobs are quoted per square metre after site inspection.
Why Choose Us
Grinding looks straightforward until you see what happens when it is done badly. Over-grinding weakens the surface, under-grinding leaves the problem half-fixed, and skipping dust extraction turns the worksite into a serious health hazard.
Commercial-grade planetary grinders for clean, even results
HEPA-filtered dust extraction so the work stays clean and safe
Diamond tooling matched to job conditions for the right cut every time
Full QBCC licensing and public liability insurance
Honest assessment including telling you when grinding isn't the right answer
Written workmanship warranty on every job
Tidy worksite practices with full clean-up at handover
Concrete grinding is one of those jobs where a quick site visit tells us almost everything we need to know. We'll walk the area with you, identify the problems, and provide a clear written quote with no pressure and no obligation.
Request Your Free Inspection