Concrete Driveway Brisbane
Hire Asphalt Contractors In Brisbane
Looking for contractors who can repair your Concrete Driveway Brisbane? There are many different reasons for your driveway to be damaged. Sometimes, it can be a result of the environment or even from the weather. The good news is that there are ways to fix these damages and keep your driveway in good condition. If you have a pothole, then you can fix it by filling it with gravel and asphalt. If you have a crack on your driveway, then you should use an epoxy sealant or concrete filler.
You should also make sure that the cracks are not too big so they don’t get bigger over time and cause more damage in the future. When it comes to driveway repair, it is important to know the different types of damage and what causes them. Concrete Driveway Brisbane repairs the following damages to your driveway at an affordable price. Give us a call for a free, no obligation estimate.
Get a free quote
Signs that you need Driveway Repair
Spot the different signs of concrete damage so you know when to call us. Concrete can wear and tear over time but when time comes when they have to be repaired or replaced, having prompt response can take you a long way. When you see the signs below, don’t be afraid to contact our team. We will be there right away to assess the damage and recommend the best possible solution. Feel free to give us a call to get a free estimate.
Potholes
Potholes can be caused by a variety of things such as heavy rain or snow, an animal digging up the ground, or even a car accident. The weight of cars and trucks passing through your driveway can also cause potholes overtime, which can grow bigger when not repaired right away. Water and dirt get trapped in the hole, which freezes during the cold season. This causes the hole to grow larger as it thaws out during spring. There are two ways to repair a pothole: patching it with asphalt or pouring concrete into the hole and letting it harden. Patching asphalt is cheaper but only lasts for about a year before another pothole forms in the same spot. Pouring concrete is more expensive but lasts for decades without any maintenance required, except for an occasional sealant application.
Cracks
A driveway crack is a common problem with concrete and can be caused by a variety of reasons. The most common cause is the expansion and contraction of the concrete due to temperature changes. This type of crack usually starts at the base or in an area where there was soil contact with the concrete.
The first step is to identify the type of crack you have. There are three different types of cracks: driveway cracks, concrete cracks, and concrete spalling. Driveway cracks are typically found at the bottom of a driveway slab and are usually caused by water seeping under the slab and freezing during winter months. Concrete cracks can be caused by shrinkage in the concrete as it cures or from improper installation of reinforcing steel bars in the concrete slab before it sets up. Concrete spalling is caused by ground movement, such as from frost heave, which causes chunks of concrete to pop off from the surface. The second step is to determine if you want to try repairing your crack yourself or hire a professional for help with your repair project. Smaller cracks can be DIY using tools such as a jackhammer, chisel, small hand sledgehammer. But just to be sure, you can always contact Concrete Driveway Brisbane.
Other Signs Of Concrete Damage
Spalling
A concrete spalling is a term that refers to small pieces of concrete that have broken off from a larger surface. This can happen for many reasons, including: water damage, frost heave, chemical damage, and freeze-thaw cycles. Spalling can also be caused by repeated heavy loads on one point in the concrete which causes it to crumble away. The best thing to do when concrete starts spanning is to allow for water expansion. Concrete contractors in Brisbane basically know how to repair or resurface spalling.
Settlement
Settlement happens when voids form under a concrete pad, the concrete tends to crack, break and settle into the void. The result is an uneven and unstable surface that can easily wear as vehicles pass over it. Voids usually come from soil issue or loosely compacted concrete during pouring. Concrete repair should always be done as soon as possible because it will make it more difficult for future repair work if you wait too long. If you let cracks grow over time, they will get bigger and more expensive to repair later on down the line.